Grey #4x3 Copper 9-Wire Installation Cable for 12-16kW Generac Generators Features:
ONLY FOR SALE WITH THE PURCHASE OF A GENERATOR. (purchases made alone will be canceled)
SALE OF CUT WIRE IS FINAL AND NO RETURNS WILL BE ACCEPTED
Starting at $12.12 per foot. The price per foot decreases as the length selected increases.
This cable includes the following copper conductors: Three - #4 AWG, One - #8 AWG, Nine - #18 AWG
This is an all inclusive cable that includes all conductors necessary to connect your generator to the transfer switch. We recommend you measure the linear distance between the generator and transfer switch. The exact path the wire will be installed. Add 5' in length for connections within the generator and transfer switch
Many jurisdictions across the United States have their own rules, standards and interpretation of the NEC. You are responsible to confirm acceptance by your Authority Having Jurisdiction. See the spec sheet to provide them for approval. There are no returns or refunds once your order has been processed and the wire has been cut.
#4x3 Copper 9-Wire Installation Cable Features:
- Wire Outer Diameter = 0.920"
- Conductors: ASTM B 3, ASTM B 8, ASTM B 174
- Insulation: ICEA S-95-658 (NEMA WC 70), ICEA S-73-532 (NEMA WC 57) CSA C22.2 No. 75 & UL83 for Type THHN/THWN wires
- Ratings: UL Standard: 1277, UL: 1685, UL: Type TC-ER-JP 600V, UL: THHN/THWN 600V, NEC/NFPA: 2023 / 336.10(9), CSA CIC/TC
- (UL) E60544-PA POWER AND CONTROL TRAY CABLE TYPE TC-ER-JP 1 AWG AL (42,4 mm2) 3/C + 6 AWG AL (13,3 mm2) 1/C GROUND THWN CONDS 75C DRY/75C WET & 18 AWG (0,82 mm2) 9/C TFFN CONDS 600V OIL RES I SUNLIGHTRESISTANCE DIRECT BURIAL JOIST PULL TCERDirect.com PN AL TCERJP 1724G+2 "sequential footage print"
#4x3 Copper 9-Wire Installation Cable Components:
- (3) - #4 AWG Class C stranded, soft drawn, bare copper circuit conductors w/40 mils (1.02 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 6 mils (0.15 mm) nylon applied directly to the surface of the insulation.
- (9) - #18 AWG Class K stranded, soft drawn, bare copper conductors w/15 mils (0.38 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 4 mils (0.10 mm) nylon applied directly to the surface of the insulation.
- (1) - #8 AWG Class C stranded, soft drawn, bare copper grounding conductor w/30 mils (0.76 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 5 mils (0.13 mm) nylon applied directly to the surface of the insulation.
- Mylar binder tape.
- 80 mils (2.03 mm) of heat and moisture resistant, polyvinyl chloride (PVC) jacket. A ripcord shall be placed underneath the jacket.
