Generac 0C30250SRV Oil Pressure Switch Features:
Always refer to owner's manual for correct part number. Do not rely on pictures alone.
-
NOT HAPPY !
BEEN TRYING FOR 2 WEEKS TO GET THE RIGHT PART, EVEN SENT 3 PHOTOS OF THE PART TO TIM. PLEASE HELP I HAVE A PISSED OFF CUSTOMER. I'VE ALREADY SENT THE UNIT BACK TO YOU. 20KW. GENERAC MODEL#0062581 SERIAL#9207709 NORMALLY OPEN #0G6820 10PSI 1435 MEX 2. MAC (518) 928-0180
-
Works as replacement for discontinued part
This oil pressure sensor works on my 2009 Generac 20kw. The original sensor wires connect with screws but this replacement sensor has push on connectors. The connectors are supplied but one of the original connections combines two black wires that will not fit in the supplied connector. I had a slightly larger connector on had that fit the two wires. In hindsight I should have used a wire nut with a short piece of wire to the new connector. The sensor is a perfect fit and solved my low oil pressure alarm problem. Before replacing the sensor, I verified the oil pressure with a gauge.
-
Very...
It was a replacement switch for an older unit and there was no problem installing it. Took approximately 15 minutes. Generator is working fine now. It was also delivered within a few days of ordering it.
-
Oil pressure switch
Fit my generac 22kw perfectly. Breeze to install
-
Oil Pressure Switch
Fit was perfect on my Generac Generator, which developed a small oil leak at the end of the original switch, replaced it and leak stopped! Thank you for the fast shipping and customer service.
-
Oil Pressure Switch Replacement
Pressure Switch was easy to change and got the unit running again
-
Direct Replacement
Low oil pressure switch,
-
Direst Replacement
Low oil pressure switch,
-
Oil Sensor
They took the time to locate the correct part for my unit. It arrived very quickly. I recommend AP