QwikPad 5" Mounting Pad for Generac 9-26kW Air Cooled Generators

SKU: QT8230
(No reviews yet) Write a Review
Availability:
In Stock - Ships with a Generator ONLY
$389.00

QwikPad 5" Mounting Pad for Generac 9-26kW Air Cooled Generators Features:

QwikPad  QT8230 5" Mounting Pad For Generac 9-26kW Generators Features: 

  • The QT8230 Mounting Pad is designed to resist 180 mph+ winds and wind pressure of 66.2 PSF. It is made of the finest materials for durability and reliability.
  • The QT20XXX series is Hurricane-Zone NFPA37 Compliant. It fastens your Generac air-cooled generator down securely so high-velocity winds do not damage it.
  • QwikPad QT8230 is a plastic mounting pad that is filled with water after placement. It comes with a gel that solidifies when you add water to it. Corrosion-proof steel bolts are used to secure the pad and are included with the purchase. 
  • After the water is added to the gel, the weight of the pad increases to more than 50 lbs. as compared to its lighter-weight concrete rivals in the market. The Roto-molded design supports the weight of the generator even when it is not filled.
  • The material used in the construction of the pad is UV-resistant, which makes the pad long-lasting. It can handle all outdoor elements and conditions, including sub-zero temperatures.
  • The generator support pad is only 46 lbs. when purchased, but when water is added to the pad the weight increases to 330 lbs. 
  • QwikPad QT8230 comes with optional ground and concrete anchors that provide added hurricane protection where such reinforcement may be required.
  • This mounting pad works only with Generac units and ships only with a Generac generator. 
  • The Made in USA base pad carries a 90-day limited warranty. 

Mounting pads are a necessity when you need to install a generator in a storm-prone area. Before the stormy season arrives, it is best to get prepared for it. If you have not bought a generator yet, get a Generac air-cooled unit, which will give you many years of reliable performance and low overall cost. With a generator installed at your house, you will never again be left in the dark. Foods will remain fresh in the refrigerator and freezer, and you can continue to run your air conditioning for as long as it may take for the grid power supply to be restored.  

The QwikPad QT8230 pads secure your Generac air-cooled generator for many years of dependable service. If you have a Generac air-cooled generator, use the lightweight QwikPad QT8230 for easy installation. The 5-inch pads are far superior to the 3-inch pads in every respect. There is no sinking into the ground and no shifting as may occur with gravel. Concrete may decompose and crack over time. The QT830 has a roto-molded design that outperforms concrete pads in stability and durability under storm-zone conditions. It takes only 10 minutes to install.  

When you are looking for quality and performance with best comparative value for your money, the QwikPad QT8230 will be the easy best choice. It is specifically sized for the following Generac Generators:

  • 9kW- G007029, G007030,
  • 11kW- G007031, G007032,G007033,
  • 16kW- G007035, G007036,G007037,
  • 20kW- G007038, G007039,
  • 22kW- G007042, G007043. 

The above models all have these exterior dimensions: L 56.0 x W 40 x H 5.0 in.  

TECHNICAL SPECS & DOWNLOADS